Generator Replacement

Generator Mounting:

REMOVE OR DISCONNECT
1. Negative battery cable at battery.
2. Serpentine belt.

CAUTION: To avoid personal Injury when rotating the serpentine belt tensioned on 2.4L use a tight fulfilling 13 mm wrench that Is at least 61 cm (24") long. This operation can be done using tool J 37059 or equivalent.

3. Generator mounting stud and bolts.
4. Generator electrical connections.
5. Generator assembly.

INSTALL OR CONNECT
1. Generator assembly.
2. Generator electrical connections.
3. Generator mounting stud and bolts.
4. Serpentine belt.
5. Negative battery cable.