Blower Motor Switch: Service and Repair

Auxiliary Blower Motor Switch Replacement

Removal Procedure

Note: Gently pull downward at the front edge of the overhead console to disengage the fasteners.




1. Remove the overhead console (1).
2. Disconnect the blower motor switch electrical connector.
3. Remove the blower motor switch screws.
4. Remove the blower motor switch from the dome lamp housing.

Installation Procedure

1. Install the blower motor switch to the dome lamp housing.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the blower motor switch screws.

Tighten the screws to 1 Nm (9 lb in).

3. Connect the blower motor switch electrical connector.




4. Install the overhead console (1).