Instruments - Electronic Cluster False Engine Overheat
85-1188C
SEPT.., 1985
Subject: ELECTRONIC CLUSTER REGISTERS FALSE ENGINE OVERHEAT CONDITION ON CAVALIER
Model and Year: 1985 CAVALIER ELECTRONIC CLUSTERS (U52) BUILT PRIOR TO VIN F7166860 (LORDSTOWN) AND FJ188187 (JANESVILLE)
TO: ALL CHEVROLET DEALERS
Some subject vehicles may exhibit a condition where the temperature indicators incorrectly stay lit after starting the car. The telltale light and the bar graph lights are both affected. This condition occurs if the engine is started during the cluster's self test cycle at the instant all the bars are lit in the temperature bar graph.
To correct this condition, the dark green wire (circuit 35) going to the ignition switch must be cut and taped using the following procedure:
1. Remove 3 screws in the front of the LH sound absorber and drop the panel down. (Reference 1985 Cavalier Shop Manual Figure 8C1-112).
2. Remove the steering column trim cover (Shop Manual Figure 8C1-2)
3. Locate the dark green wire coming out of the IP Harness (RH side of steering column) and running to the ignition switch (black connector).
4. Cut the dark green wire and tape both ends with electrical tape.
5. Re-assemble steering column trim cover and sound absorber panel.
Labor Operation Number: T1139
Labor Time: .3 hours