Fuel Level Sensor Assembly

REMOVE OR DISCONNECT
1. Relieve fuel system pressure.
2. Drain fuel tank.
3. Fuel tank.
4. Fuel sender assembly.
5. Bumper from modular fuel sender assembly.
6. Fuel level sensor

INSTALL OR CONNECT
1. Fuel level sensor to modular fuel sender.
2. Bumper to modular fuel sender assembly.
3. Fuel sender assembly.
4. Fuel tank.
5. Refill tank.

Inspect
Turn ignition to "ON" position for two seconds, then turn to "OFF" for ten seconds. Again turn to "ON" position, and check for fuel leaks.

FUEL PUMP REPLACEMENT
The fuel pump is not serviced separately. The modular sender assembly must be serviced as a complete unit.