Daytime Running Lamp Control Unit: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.




1. Disconnect the negative battery cable.
2. Remove the radio.




3. Remove the daytime running light (DRL) ambient light sensor module from the HVAC duct.




4. Disconnect the DRL module electrical connectors.
5. Remove the DRL module.

INSTALLATION PROCEDURE




1. Install the DRL module.
2. Connect the DRL module electrical connectors.




3. Slide the module onto the HVAC duct retainers.
4. Install the radio.




5. Connect the negative battery cable.