Coil Pack Removal

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Disconnect the main electrical connector teeding the ignition coils.
3. Disconnect the ignition coil harness connector.
4. Disconnect the spark plug wire at the ignition coil.
5. Remove the ignition coil mounting bolts.
6. Remove the ignition coil.


INSTALLATION PROCEDURE
1. Install the ignition coil.
2. Install the ignition coil mounting bolts.

Tighten
Bolts to 12 Nm (106 lb in).

3. Connect the spark plug wire at the ignition coil.
4. Connect the ignition coil harness connector.
5. Connect the main electrical connector feeding the ignition coils.
6. Connect the negative battery cable.

Tighten
Battery cable to 15 Nm (11 lb ft).