Child Seat Tether Attachment: Service and Repair
CHILD RESTRAINT TETHER ANCHOR REPLACEMENTREMOVAL PROCEDURE
IMPORTANT: The child seat tether brackets have an anti-rotation tab. You must rotate this tab 90 degrees (Impala only) in order to remove or install the tether to the rear shelf.
1. Remove the rear shelf trim panel.
2. Remove the screws from the child seat tether brackets.
3. Rotate the child seat tether brackets 90 degrees (Impala only) in order to remove the child seat tether brackets from the slot.
4. Remove the child seat tether brackets from the rear shelf.
INSTALLATION PROCEDURE
1. Position the child seat tether brackets to the slot in the rear shelf.
2. Rotate the child seat tether brackets 90 degrees (Impala only) in order to install the child seat tether brackets into the slot.
NOTE: Refer to Fastener Notice in Service precautions.
3. Install the screws to the child seat tether brackets.
Tighten
Tighten the screws to 20 N.m (15 lb ft).
4. Install the rear shelf trim panel.