Front

Brake Rotor Replacement-Front
Removal Procedure





Caution: Do not move the vehicle until a firm brake pedal is obtained. Failure to obtain a firm pedal before moving vehicle may result in personal injury.

1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and the wheel.
3. Remove the front brake caliper. Refer to Brake Caliper Replacement - Front.
4. Remove the caliper mounting bracket bolts and the caliper mounting bracket. Refer to Brake Caliper Bracket Replacement-Front.
5. Remove the brake rotor (1) from the wheel hub (2).
6. Clean the metal contact surfaces between the brake rotor and the hub bearing flange.

Installation Procedure





1. Install the brake rotor (1) onto the wheel hub (2).
2. Install the caliper mounting bracket and caliper mounting bracket bolts. Refer to Brake Caliper Bracket Replacement-Front
3. Install the front brake caliper. Refer to Brake Caliper Replacement-Front.
4. Install the tire and the wheel.
5. Lower the vehicle.
6. Pump the brake pedal several times until firm.