Console Replacement

CONSOLE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the right console trim panel.
2. Remove the left console trim panel.




3. Remove the front console screw covers from behind the console.
4. Remove the front console screws.




5. Position the front seats to the full forward position.
6. Remove the rear console bolts.
7. Place the shifter in drive.




8. Remove the pen tray.




9. Disconnect the electrical connectors and remove the console.

IMPORTANT: Do not let the console contact the shifter handle or bezel.

INSTALLATION PROCEDURE




1. Connect the electrical connectors and install the console.

IMPORTANT: Do not let the console contact the shifter handle or bezel.




2. Install the pen tray.




3. Install the rear console bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 1 N.m (10 lb in).

4. Install the front console screws.

Tighten the bolts to 1 N.m (10 lb in).




5. Install the front console screw cover.
6. Install the left console trim panel.
7. Install the right console trim panel.