Installation

INSTALLATION





1. Align the spline on the steering wheel hub to the column shaft, then install the steering wheel (1).
2. Install a NEW retainer bolt (2). Tighten the bolt to 70 Nm (52 ft. lbs.).





3. Install the airbag (3). Driver Air Bag - Installation
4. Install the negative battery terminal on the battery. It is important that this is performed properly (including calibration of steering angle sensor if equipped with ESC). Battery System - Battery Reconnection

CAUTION: If the steering wheel is excessively off-center while driving, outside of Chassis specifications, inadvertent ESC activations may occur on a vehicle so equipped.

5. Test the operation of the horn, lights and any other functions that are steering column operated.