Crankshaft, Engine
| Main Journal: | ||
| Diameter (All) | 57.974 - 57.995 Millimeter (mm) | |
| Radial Runout (Shaft Support on No.1 and No.5 Bearings Measured at No.3 Journal) | 0.03 - 0.061 Millimeter (mm) | |
| Main Bearing Clearance (AlI) | 0.015 - 0.061 Millimeter (mm) | |
| Crankshaft End Play | 0.070 - 0.302 Millimeter (mm) | |
| Service Oversize | 0.25 and 0.5 Millimeter (mm) | |
| Connecting Rod Journal: | ||
| Diameter (All) | 48.981 - 48.987 Millimeter (mm) | |
| Out-of-Round (Maximum) | 0.004 Millimeter (mm) | |
| Rod Bearing Play | 0.006 - 0.031 Millimeter (mm) | |
| Rod Bearing Clearance | 0.019 - 0.063 Millimeter (mm) | |
| Crankshaft Bearing Cap Bolts | 50 Newton Meter (Nm) 50 Nm + 45 deg. + 15 deg. | |
| Crankshaft Pulley Bolt | 20 Newton Meter (Nm) | |
| Crankshaft Timing Belt Drive Gear Bolt | 130 Newton Meter (Nm) 130 Nm + 40 deg. + 50 deg. |