Cylinder Block

GENERAL SPECIFICATIONS
Cylinder Bore
Diameter 99.314 - 00.365 mm (3.910 - 3.912 inch)
Out of Round (maximum) 0.127 mm (0.005 inch)
Taper (maximum) 0.254 mm (0.010 inch)
Oversize Limit 1.016 mm (0.040 inch)
Lifter Bore
Diameter 22.99 - 23.01 mm (0.9501 - 0.9059 inch)
Distributor Drive Bushing (Press Fit)
Bushing to Bore Interference 0.0127 - 0.3556 mm (0.0005 - 0.0140 inch)
Shaft to Bushing Clearance 0.0178 - 0.0686 mm (0.0007 - 0.0027 inch)