Intake Manifold

INTAKE MANIFOLD





- Install the intake manifold retaining bolts and tighten in sequence shown to 12 Nm (105 in. lbs.).

THROTTLE BODY





CAUTION: The throttle body mounting bolts MUST be torqued to specifications. DO NOT OVER TIGHTEN MOUNTING BOLTS. Over tightening can cause damage to the throttle body, throttle plate, gaskets, bolts and/or the intake manifold. Proper torque of the mounting bolts is critical to normal operation.

- Tighten mounting bolts (as shown) in a mandatory torque criss-cross pattern sequence to 7.5 Nm (65 in. lbs.).