Lower

REMOVAL
1. Release the fuel system pressure. Follow the proper procedure.
2. Disconnect the battery ground cable.
3. Drain the cooling system.
4. Remove the intake manifold support bolts and the intake manifold support.
5. Disconnect the accelerator cable from the throttle control lever.
6. Remove the air cleaner to intake manifold tube.
7. Remove the coolant hoses from the intake manifold.
8. Tag and disconnect the necessary wiring and vacuum hoses.
9. Remove the intake manifold to cylinder head bolts and nuts.
10. Remove the intake manifold and intake manifold gasket (9439).

INSTALLATION
1. Clean all traces of gasket material from the cylinder head and intake manifold.
2. Position a new intake manifold gasket and the intake manifold on the cylinder head.
3. Install the intake manifold to cylinder head bolts and nuts. Tighten the intake manifold bolts and nuts to 19-26 Nm (14-20 ft. lbs.).
4. Connect the vacuum hoses and wiring as tagged during removal.
5. Connect the coolant hoses to the intake manifold.
6. Install the air cleaner to intake manifold tube.
7. Connect the accelerator cable to the throttle control lever.
8. Install the intake manifold support and intake manifold support bolts. Tighten the intake manifold support bolts to 31-46 Nm (22-34 ft. lbs.).
9. Fill the cooling system. Follow proper procedure.
10. Connect the battery ground cable.