Crankshaft, Engine

Main bearing journal diameter		2.2827-2.2835 in
Out-of-Round Limit		0.00032 in
Taper limit		0.0003 in per 1 in
Journal Runout limit (Runout of bearings 2,3, and 4,)		0.002 in
Crankshaft end play		0.004-0.012 in
Surface Finish (RMS)		12 micro-in
Clearance to crankshaft		0.0008-0.0026 in
Thrust bearing journal length		1.135-1.136 in
Connecting Rod Journal diameter		1.7279-1.7287 in
Out-of-Round limit		0.00032 in
Taper limit		0.0003 in per 1 in
Surface limit (RMS)	Rear	25 micro-in
	Front	35 micro-in
Main bearing thrust face surface finish (RMS)		25 micro-in
	Rear	35 micro-in
Front Runout limit		0.001 in
Crankshaft end play		0.004-0.012 in