Flow of Diagnosis

Work Flow
1. Check the symptom and customer's requests.
2. Understand the system description. Refer to "System Description".
3. Carry out the preliminary check. Refer to "Preliminary Check".
4. Carry out the communication diagnosis.
If CONSULT-II is used, refer to "IVMS Communication Diagnosis".
If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS".
Is the communication diagnosis result OK?
If OK, GO TO 7.
If NG, GO TO 5.

5. Repair or replace depending on the diagnosis result.
6. Carry out the communication diagnosis again.
If CONSULT-II is used, refer to "IVMS Communication Diagnosis".
If CONSULT-II is not used, refer to "COMMUNICATION DIAGNOSIS".
Is communication diagnosis result OK?
If OK, GO TO 7.
If NG, GO TO 5.

7. Perform self-diagnosis. If CONSULT-II is used, refer to GW-97, "SELF-DIAGNOSIS RESULTS". IVMS Operation Procedure
If CONSULT-II is not used, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER".
Is self-diagnosis result OK?
If OK, GO TO 11.
If NG, GO TO 8.

8. Repair or replace depending on the diagnosis result.
9. Carry out the self-diagnosis again. If CONSULT-II is used, refer to "SELF-DIAGNOSIS RESULTS".
If CONSULT-II is not used, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER".
Is self-diagnosis result OK?
If OK, GO TO 11.
If NG, GO TO 8.

10. Refer to Trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "Symptom Chart".
11. Does the Reverse Interlock Door Mirror System operate normally?
If it operates normally, GO TO 12.
If not, GO TO 10.

12. Inspection END.