Maintenance Indicator Reset

How to Reset the Engine Oil Life System

The Engine Oil Life System calculates when to change
the engine oil and filter based on vehicle use.
Whenever the oil is changed, reset the system so it can
calculate when the next oil change is required. If a
situation occurs where you change the oil prior
to a change engine oil light or CHANGE ENGINE OIL
message being turned on, reset the system.
To reset the Engine Oil Life System:

1. Turn the ignition key to ON/RUN with the
engine off.

2. Fully press and release the accelerator pedal slowly
three times within five seconds.

3. Turn the key to LOCK/OFF.
If the light/message comes back on when you start your
vehicle, the engine oil life system has not reset.
Repeat the procedure.

With Driver Information Center(DIC)

Press the select button to reset certain
DIC functions, turn off or acknowledge messages on
the DIC display, and set your customization settings.
For example, this button will allow you to reset the trip
odometers, turn off the FUEL LEVEL LOW message,
and enables you to scroll through and select the
language in which the DIC information will appear.