Installation

LIGHTING: AUTOMATIC LIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

(a) Attach the 2 claws and install the automatic control sensor.





(b) Connect the connector.

2. INSTALL DEFROSTER NOZZLE ASSEMBLY Reassembly

3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT Reassembly

4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT Reassembly

5. INSTALL INSTRUMENT PANEL SAFETY PAD

HINT
Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" Installation.

6. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.