Seat - Front, Center

SEAT - FRONT, CENTER

Removal and Installation

NOTE: In the event of an impact of sufficient force, the front center seat has an automatic locking pin to keep the center seat backrest (front seat armrest) from falling forward. To reset the center seat backrest, refer to Seat Armrest Locking Pin Reset.

1. Remove the driver and passenger seats.
- For installation, while positioning the driver and passenger seats, make sure the center seat safety belt and buckle anchors are positioned to go through the seat mounting studs.

2. Remove the front center seat.

3. NOTE: Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

To install, reverse the removal procedure.