Timing Belt Tensioner: Service and Repair

a. Set a flat washer under the tensioner body to prevent damage to the body plug.

Caution: Pressing the tensioner rod with more than 9,807 N (1,000 kgf, 2,200 lbf) can damage the tensioner spring.

b. Slowly press in the tensioner rod by using a press or a vise.
c. Insert a pin in the body as shown to hold the tensioner rod.





d. Install the collar, then install the auto tensioner onto the cylinder block.

Tightening torque: 19-25 N.m (1.9-2.6 kgf, 14-18 ft.lbf)