Automatic Trans.
REMOVAL/INSPECTION/INSTALLATION1. Remove in the order shown in the figure, referring to Removal note.
2. Inspect the intake air system components and repair or replace them as necessary.
3. Install in the reverse order of removal.
1. Fresh air duct
Inspect for damage
2. Air cleaner
Inspect for excessive dirt and damage
3. Air cleaner element
Inspection
4. Mass air flow sensor
Inspection
5. Air hose
Inspect for damage
6. Resonance chamber
Inspect for damage Installation note
7. Accelerator cable
Inspection/Adjustment
8. Throttle body
Inspection
9. BAG valve
Inspection
10. [1][2]Intake manifold bracket
11. [1][2]Intake manifold
Installation Note ([1][2]Intake Manifold)
1. Tighten the bolts in the order shown in the figure.
Tightening torque: 19-25 N.m (14-18 ft-lb)
2. Refill the radiator with the specified engine coolant.
3. Check for engine coolant leakage.