Clutch: Service Precautions

CAUTION:
- Clutch fluid will damage painted surfaces. If clutch fluid does get on a painted surface, wipe it off immediately.

- If a clutch pipe(s) has been disconnected anytime during the procedure, add brake fluid, bleed the air, and inspect for leakage after the procedure has been completed.

- If removing the clutch pipe, remove it by using the SST (49 0259 770B). If installing the clutch pipe, modify the clutch pipe tightening torque to allow for use of a torque wrench-SST (49 0259 770B) combination, and then tighten the clutch pipe by using the SST (49 0259 770B).