Clutch: Service Precautions

GENERAL PROCEDURES (CLUTCH)
Precaution
Clutch Pipe
- If any clutch pipe has been disconnected anytime during the procedure, add brake fluid, bleed the air, and inspect for leakage after the procedure has been completed.
- If removing the clutch pipe, remove it by using the SST (49 0259 770B). If installing the clutch pipe, change the clutch pipe tightening torque to allow for use of a torque wrench-SST (49 0259 770B) combination, and then tighten the clutch pipe by using the SST (49 0259 770B).