Suspension: Service Precautions

WHEELS AND TIRES REMOVAL/INSTALLATION
1. The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, retighten it to 89 - 110 Nm (9 - 12 kgf-m, 66 - 86 ft. lbs.).

SUSPENSION LINKS REMOVAL/INSTALLATION
1. Tighten any part of the suspension that uses rubber bushings only after the vehicle has been lowered and unloaded.

Note Unloaded ... Fuel tank is full. Engine coolant and engine oil are at specified levels. Spare tire, jack and tools are in designated position.

POWER STEERING COMPONENTS REMOVAL/INSTALLATION
1. If any power steering fluid line has been disconnected anytime during the procedure, add ATF M-III or equivalent (e.g. Dexron(R)II), bleed the fluid line, and inspect for leakage after the procedure has been completed.