Inspection Procedure 2

Accelerator Pedal Operation Is Not Smooth (Over Acceleration)

DIAGNOSIS

STEP 1. Check the accelerator pedal.

Q: Is the accelerator pedal loose?

YES: Tighten the pedal, and then go to Step 4.

NO: Go to Step 2.

STEP 2. Check the accelerator cable wiring.

Q: Is the accelerator cable routing bent sharply?

YES: Correct the cable routing, and then, go to Step 4.

NO: Go to Step 3.

STEP 3. Check the accelerator cable lubricant.

Q: Is the accelerator cable lubricated sufficiently?

YES: There is no action to be taken.

NO: Refill or replace the lubricant. Go to Step 4.

STEP 4. Retest the system.

Q: Does the accelerator pedal work normally?

YES: This procedure is complete.

NO: Go to Step 1.