System Specifications
SERVICE DATA AND SPECIFICATIONSCYLINDER BLOCK
PISTON, PISTON RING AND PISTON PIN
Available Piston
Piston Ring
Piston Pin
CONNECTING ROD
CRANKSHAFT
MAIN BEARING
Undersize
Main Bearing Oil Clearance
Connecting Rod Bearing
Undersize
Connecting Rod Bearing Oil Clearance
Crankshaft Pulley
Main Bearing
Follow the steps below to tighten each main bearing cap bolt.
Apply engine oil to threads and seating surfaces of bolts, and tighten all bolts temporarily.
Measure tightening angle using Tool.
Tool number : KV10112100 (BT-8653-A)
CAUTION: Measure tightening angle using Tool. Do not measure visually.
Rotate crankshaft by hand after bolts are tightened. Check if it rotates smoothly.
Check crankshaft side clearance. Refer to Inspection After Disassembly.