Procedure After Replacing ECM

INSPECTION AND ADJUSTMENT


Procedure After Replacing ECM

When replacing ECM, the following procedure must be performed.
1. Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Special Repair Requirement With Intelligent Key System(with Intelligent Key system) or Special Repair Requirement Without Intelligent Key System Description Without Intelligent Key System Special Repair Requirement Without Intelligent Key System, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
: Special Repair Requirement" (without Intelligent Key system).
2. Perform VIN Registration.
3. Perform Accelerator Pedal Released Position Learning.
4. Perform Throttle Valve Closed Position Learning.
5. Perform Idle Air Volume Learning.