Connecting Rod, Engine

Tighten the connecting rod bolts using Tool in four steps as follows:

Tool number: KV-10112100 (BT-8653-A)






CAUTION: Always use either an angle wrench or protractor. Avoid tightening based on visual check alone.

Step 1 27.4 Nm (2.8 kg-m, 20 ft-lb)
Step 2 0 Nm (0 kg-m, 0 ft-lb)
Step 3 19.6 Nm (2.0 kg-m, 14 ft-lb)
Step 4 90� - 95� (target 90� degrees)



Connecting Rod