Special Repair Requirement

INSPECTION AND ADJUSTMENT

ECM RECOMMUNICATING FUNCTION : Special Repair Requirement


1. PERFORM ECM RECOMMUNICATING FUNCTION

1.Install ECM.
2.Insert the registered Intelligent Key*, and turn ignition switch ON.
*: To perform this step, use the key that has been used before performing ECM replacement.
3.Maintain ignition switch in the ON position for at least 5 seconds.
4.Turn ignition switch OFF.
5.Check that the engine starts.
- GO TO 2.

2. PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM

Perform Special Repair Requirement.
- END