Connecting Rod Cap Torque

TIGHTENING SPECIFICATIONS
Connecting Rod Bolts
1st Pass 14 - 16 Nm (10 - 12 ft. lbs.)
2nd Pass [1] 60 - 65° clockwise

DIMENSIONS
Bend [2] 0.15 (0.0059 inch)
Bearing Clearance (Big End)
Standard 0.0020 - 0.045 mm (0.0008 - 0.0018 inch)
Limit 0.065 mm (0.00256 inch)
Bushing Clearance (Small End)
Standard 0.005 - 0.017 mm (0.0002 - 0.0007 inch)
Limit 0.023 mm (0.0009 inch)
Bushing Inner Diameter 22.000 - 22.012 mm (0.8661 - 0.8666 inch)
Center Distance 136.25 - 136.35 mm (5.3642 - 5.3681 inch)
Inner Diameter
Small End 24.980 - 24.000 mm (0.9835 - 0.9843 inch)
Big End 51.000 - 51.013 mm (2.0079 - 2.0084 inch)
Side Clearance
Standard Value 0.20 - 0.35 mm (0.0079 - 0.0138 inch)
Limit Value 0.50 mm (0.0197 inch)
Torsion [2] 0.30 mm (0.0118 inch)

[1] If an angle wrench is not available, tighten nuts to 38 - 44 Nm (28 - 33 ft. lbs.).
[2] Per 100 mm (3.94 inch)