Memory Recall

When the DRIVER-1 or DRIVER-2 button is pressed, the memory seat/mirror module receives the input. A single beep is sounded. The memory seat/mirror module supplies battery voltage (B+) to the seat motors until all the seat position sensor feedback voltages equal the feedback voltages stored in the memory for the appropriate driver.

When the DRIVER-1 and DRIVER-2 buttons are pushed simultaneously battery positive voltage (B+) is supplied simultaneously to the memory seat/mirror module memory 1 and memory 2 inputs, signaling the easy exit function. In response, the memory seat/mirror module will move the seat to the fully down and back position. The module supplies battery positive voltage (B+) to the following components until the seat is fully back and down:
^ LH seat front vertical motor
^ LH seat rear vertical motor
^ LH seat horizontal motor

The recline motor is not moved during this operation. The memory recall and easy exit functions may only be performed if the ignition switch is in the OFF position or the gear selector is in the PARK position.