Ignition Coil: Service and Repair

Ignition Coils And Module:

Ignition Coil Assembly:

Numbers used refer to images.

REMOVE OR DISCONNECT
1. Be sure ignition switch is in "OFF" or "LOCK" position.
2. Spark plug wire harness assembly from ignition coil assembly (2).
3. Electrical connectors.
4. Nuts (16).
5. Ignition coil assembly (2).


INSTALL OR CONNECT
1. Ignition coil assembly (2).
2. Nuts (16).

Tighten
Nuts (16) to 10 Nm (89 lb. in.)

3. Electrical connectors.
4. Spark plug wire harness assembly.