Crankshaft, Engine

Main Bearing Journal Diameter 60.00 - 60.024 mm (2.3622 - 2.3631 inch)
Width, Main Thrust Bearing Journal No.3:
Including Fillets 27.837 - 27.913 mm (1.0959 - 1.0989 inch)
Out Of Round Maximum 0.005 mm (0.0002 inch)
Straightness, Taper 0.007 mm (0.0003 inch)
Crankshaft Bearing Clearance 0.010 - 0.060 mm (0.00039 - 0.0023 inch)
Rod Bearing Journal Diameter 47.975 - 48.00 mm (1.8887 - 1.8897 inch)
Rod Bearing Inside Diameter 48.001 - 48.043 mm (1.8898 - 1.8914 inch)
Out Of Round 0.005 mm (0.0002 inch)
Straightness, Taper 0.007 mm (0.0003 inch)
Connecting Rod Journal Width 23.370 - 23.750 mm (0.9200 - 0.9350 inch)
Runout Of Crankshaft At Flywheel Flange:
Maximum 0.050 mm (0.002 inch)
Supported On Front and Rear Journals Clearance To:
Crankshaft Position Sensor 0.77 - 1.77 mm (0.0303 - 0.0697 inch)
Flywheel Fit 0.000 - 0.013 mm loose (0.0000 - 0.0005 inch)
Flange Runout Maximum 0.03 mm (0.00120 inch)
Stroke Of Crank 94 mm (3.70 inch)
ID Of Seal Diameter On Crank 81.96 - 82.04 mm (3.2210 - 3.2299 inch)
Runout Of Seal Surface 0.05 mm (0.002 inch) Max.
Balancer Hub To Crank Snout OD 33.00 - 33.03 mm (1.2992 - 1.3004 inch)
ID Balancer 33.00 - 33.03 mm (1.2992 - 1.3004 inch)
Timing Gear Fit To Crankshaft Snout 33.03 - 33.06 mm (1.3004 - 1.3016 inch)