Removal/Installation

Non Turbo

1. Remove brake pads as outlined previously.
2. Loosen brake hose at caliper.
3. Press brake pedal fully to the floor and secure in that position.
4. Remove upper guide pin bolt, then disconnect brake hose at caliper and plug hose and fitting.
5. Remove caliper.
6. Reverse procedure to install and bleed brake system.

Turbo

1. Remove brake pads as outlined previously.
2. Loosen brake hose at caliper.
3. Press brake pedal fully to the floor and secure in that position.
4. Disconnect brake hose at caliper and plug hose and fitting.
5. Remove caliper.
6. Reverse procedure to install and bleed brake system.