Flywheel: Service and Repair

A: REMOVAL





1. Install ST on flywheel.
ST 498497100 CRANKSHAFT STOPPER
2. Remove clutch cover and clutch disc.

CAUTION:
^ Take care not to allow oil on the clutch disc facing.
^ Do not disassemble either clutch cover or clutch disc.





3. Remove flywheel.

B: INSTALLATION





1. Install flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER





2. Tighten the flywheel attaching bolts to the specified torque.

NOTE: Tighten flywheel installing bolts gradually. Each bolt should be tightened to the specified torque in a crisscross fashion.

Tightening torque: 72 Nm (7.3 kgf-m, 52.8 ft. lbs.)