Installation
Installation1. Installation of seal SUB-ASSY
(1) Install a new seal SUB-ASSY.
2. Installation of brake master cylinder SUB-ASSY
(1) Install the brake master cylinder SUB-ASSY with 2 nuts.
Standard value:T=13Nm {133kgf-cm} {9.6ft-lbf}
(2) Using a union nut wrench 12, connect 2 brake tubes to the brake master cylinder SUB-ASSY.
Standard value:T=19Nm {194kgf-cm} {14.0ft-lbf}
(3) Connect the brake fluid level warning switch connector.
3. Refill of brake fluid
4. Air bleeding of brake master cylinder SUB-ASSY
5. Air bleeding of brake system
6. Brake fluid leak check
7. Brake fluid level check Testing and Inspection
8. Installation of front upper suspension to cowl brace SUB-ASSY RH
9. Installation of front tire LH
Standard value:T=120Nm {1224kgf-cm} {88.5ft-lbf}