Coolant Temperature Sensor/Switch (For Computer): Service and Repair

ENGINE COOLANT TEMPERATURE SENSOR REMOVAL AND INSTALLATION

1. DRAIN ENGINE COOLANT
2. REMOVE ECT SENSOR





- Disconnect the ECT sensor connector.
- Using a 19 mm deep socket wrench, remove the ECT sensor and gasket.

3. REINSTALL ECT SENSOR
- Using a 19 mm deep socket wrench, install the ECT sensor and gasket.

Torque: 24.5 N.m (250 kgf.cm, 17.5 ft.lbf)

- Connect the ECT sensor connector.
4. REFILL ENGINE COOLANT