Knock Sensor: Testing and Inspection

COMPONENTS

INSPECTION

1. REMOVE KNOCK SENSOR 1
a. Disconnect the knock sensor connector.




b. Using SST, remove the knock sensor.
SST 09816-30010




2. INSPECT KNOCK SENSOR 1
Using an ohmmeter, check that there is no continuity between the terminal and body.
If there is continuity, replace the sensor.
3. REINSTALL KNOCK SENSOR 1
a. Using SST, install the knock sensor.
SST 09816-30010
Torque: 44 Nm (450 kg.cm, 32 ft.lb)
b. Connect the knock sensor connector.