Maintenance Indicator Reset

Reset the Maintenance Data (USA only)

1. Switch the display to the trip meter "A" when the hybrid system is operating.
2. Turn the "POWER" switch off.
3. While pressing the MPH or km/h button, turn the "POWER" switch to ON mode (do not start the hybrid system because the reset mode will be canceled). Continue to press and hold the button until the trip meter displays "000000" and the indicator stops flashing to indicate that the reset is complete.

Navigation Maintenance Item Setting (If equipped)

When the navigation system is turned on, the "Maintenance Reminder" screen displays when it is time to replace a part or certain components.

1. Push the "SETUP" button.

2. Touch "Vehicle"

3. Touch "Maintenance".

4. Touch the desired button.

"Delete All": Touch to cancel all conditions which have been input.

"Reset All": Touch to reset the item which has satisfied a condition.

"Reminder": When this button is touched, the indicator is illuminated. The system is set to give maintenance information with the "Maintenance Reminder" screen.

"Date": Touch to input the next maintenance date.

"Distance": Touch to input the driving distance until the next maintenance check.

"Delete": Touch to cancel the date and distance conditions.

"Reset": Touch to reset the date and distance conditions.

5. Touch "OK".
- The screen returns to the "Maintenance" screen.