Power Steering Fluid: Testing and Inspection

Power steering fluid level, checking
- Do not run engine and turn front wheels to straight ahead position.

Fluid in cold condition:
- Remove cap.
- Wipe dipstick off with a clean cloth.
- Screw cap on hand-tight and unscrew again.

Note:
^ The cap must be fully screwed in order to obtain an accurate fluid level reading.





- Check fluid level Level must be in area of MIN mark (up to 2 mm above or below mark).
Fluid at operating temperature (from approximately 60°C):
- Check fluid level: Level must be between MIN. and MAX. marks.

Note:
^ Fluid must be drawn off if the level is above the specified range.
^ If oil level is below the aforementioned area, then the hydraulic system must be checked for leaks. It is not sufficient to merely top off the fluid.