Front Seat Trim Panel Replacement

Front Seat Trim Panel Replacement

Removal Procedure





1. Remove the finish panel screws (4) on the left seat.
2. Disconnect the electrical connector, if equipped.




3. Remove the finish panel screws (2) on the right seat.
4. Remove the finish panel.



Installation Procedure





1. Install the finish panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the finish panel screws (2) on the right seat

Tighten the finish panel screws to 3 N.m (27 lb in).

3. Connect the electrical connector, if equipped.




4. Install the finish panel screws (4) on the left seat

Tighten the finish panel screws to 3 N.m (27 lb in).