Pinpoint Test E: The Delayed Accessory Does Not Turn Off

Glass, Frames and Mechanisms

Pinpoint Tests

Pinpoint Test E: The Delayed Accessory Does Not Turn Off

Refer to wiring Diagram Set 100, Power Windows for schematic and connector information. Diagrams By Number

Normal Operation

Under normal operation, voltage is supplied to the accessory delay relay coil and switch internally through the Smart Junction Box (SJB). Ground for the accessory delay relay is provided internally through the SJB. When the relay is energized, voltage is sent to the power window switches through circuit CPW30 (GY/YE) or CPW14 (VT/WH).

This pinpoint test is intended to diagnose the following:
- Accessory delay relay
- Wiring, terminals or connectors
- SJB



PINPOINT TEST E: THE DELAYED ACCESSORY DOES NOT TURN OFF

-------------------------------------------------
E1 CHECK THE ACCESSORY DELAY RELAY


- Ignition OFF.
- Disconnect: Accessory Delay Relay.
- Actuate the power windows.
- Do the power windows operate?

Yes
REPAIR CPW30 (GY/YE) or CPW14 (VT/WH) for a short to voltage. TEST the system for normal operation.

No
CARRY OUT the accessory delay relay component test.

If the relay tests OK, INSTALL a new SJB. TEST the system for normal operation.

-------------------------------------------------