Clutch Disc: Service and Repair

Clutch Disc and Pressure Plate





Removal
1. Remove the transaxle.





2. CAUTION: Loosen the clutch pressure plate retaining bolts evenly, by two turns at a time.

Using the special tool, remove the clutch disc and pressure plate.
- Discard the bolts.

Installation





1. Using the special tool, centralize the clutch disc on the clutch pressure plate.





2. CAUTION: Tighten the clutch pressure plate retaining bolts finger tight and then, evenly by two turns at a time to the specified torque. NOTE: Install new clutch pressure plate retaining bolts.

Using the special tool, install the clutch disc and pressure plate.
3. Remove the special tool.
4. Install the transaxle.