Work Procedure

SYSTEM SETTING

Work Procedure


1. STEP 1

There are three way of setting method.
Which method do you choose?
With CONSULT-GO TO 2.
With set switch-GO TO 3.

2. STEP 2-A (WITH CONSULT)

1.Select "Work support".
2.Select "EXIT SEAT SLIDE SETTING" then touch display to change between ON and OFF.
-EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
3.Select "SEAT SLIDE VOLUME SET" and touch either of "40 mm", "80 mm", or "150 mm".
4.Then touch "OK".
- END

3. STEP 2-B (WITH SET SWITCH)

1.Turn ignition switch OFF.
2.Push set switch and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
-Entry/exit assist are ON: Memory switch indicator blink two times.
-Entry/exit assist are OFF: Memory switch indicator blink once.
- END