Removal

NAVIGATION: MULTI-DISPLAY:

REMOVAL

1. EJECT MAP DISC
(a) Turn the ignition switch on (ACC).
(b) Push the "CLOSE" button.
(c) Touch "MAP EJECT" on the navigation screen to eject the map disc.
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) (Removal)

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (Removal)

4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (Removal)

5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (Removal)

6. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) (Removal)

7. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle) (Removal)

8. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) (Removal)

9. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) (Removal)

10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (Removal)

11. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY (Removal)

12. REMOVE NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY





(a) Remove the 4 bolts.
(b) Pull the navigation receiver with heater control panel assembly toward the rear of the vehicle and disengage the 4 clips.
(c) Disconnect each connector and remove the navigation receiver with heater control panel assembly.
13. REMOVE RADIO NO. 1 BRACKET





(a) Remove the 5 bolts and radio No. 1 bracket.
14. REMOVE RADIO NO. 2 BRACKET





(a) Remove the 5 bolts and radio No. 2 bracket.
15. REMOVE NAVIGATION RECEIVER ASSEMBLY





(a) Remove the navigation receiver assembly as shown in the illustration.